How To Add A Camera

How To Add A Camera Off Your Zencam Desktop Software.

 

Step 1: Please log into your Zencam Desktop application. 

5432.JPG

Step 2: Once you have logged into your Zencam account you can begin adding cameras. You can add a camera by clicking the "Add Device" option in the upper right-hand corner of your screen, or the hyperlink labeled "Add" a device. 

r43r.JPG

Step 3: Inside this menu you will be prompted to add a device using one of the following options; manually, via the device's serial number, or automatically by scanning your local network. 

321.JPG

If you choose to add your camera manually, please enter the serial number of your camera, which is located on the serial number of the device, the username and password for your device. If this is your first time using your camera, please note the default username and password will be admin. Once the login credential are entered, please press "Submit" to finish the setup. 

3213.JPG

If you chose to automatically scan your network for your device, please click on the "Scan Network" option. Once this is enabled, please press on the "Start Scanning" option to start scanning your network for your device. 

te.JPG

The software will then begin scanning your network, locating all IP cameras associated with your local network. 

4324.JPG

Once the software has scanned your network, a list of connected devices will appear. If you have multiple Zencam device's you wish to add to the Desktop software you can select the "All" option. 

32165.JPG

However, if you only wish to add a specific camera onto your desktop software, please select the device you wish to add and select "Add To Account". 

4324rrg.JPG

Once the camera is added onto your account, you will then need to provide the password associated with your device. Please remember if this is your first time using your device, the default password will be admin. 

rfew.JPG

Once your password has been entered successfully. The software will prompt you that your device has been added to your desktop software successfully. Please select "Next" when finished. 

32tgrtg.JPG

The next screen will show you that your device is added successfully and to continue press "OK"

5434.JPG

Congratulations! You have successfully added your device to your Zencam desktop software. 

r4erf.JPG

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.