How To Add Your Zencam Camera Into Amcrest Surveillance Pro
Zencam devices can be added into Amcrest Surveillance Pro software. Amcrest Surveillance Pro is a free software, provided by Amcrest, which allows you to access all your Amcrest devices in one central location on your PC or Mac computer. For more information on how to get Amcrest Surveillance Pro click here.
The camera must be set up first using the Zencam Security app before adding it to any additional software. For more information on how to add your device to the Zencam Security app, click here.
Note: The camera and the computer you are using must be on the same network during setup.
Adding a Zencam Device into Surveillance Pro
Step 1: Open and log into the Amcrest Surveillance Pro software.
Step 2: Open the Devices menu and click on "Add".
Step 3: Use the Amcrest IP Config tool to locate the IP address for your device from the network. To download the Amcrest IP Config tool, click here
Note: The IP address for your device can also be found by using the Zencam Security app. To access the IP address for your device, log into your account on your Zencam Security app and select your device from the Devices menu. Tap on the settings icon and tap Device Information.
Scroll down until you see the field labeled " IP Address". This will be the IP address for your device.
Note: The device can be added using the P2P method (using the device's serial number) however, for optimal use it is highly recommended to use the IP/Domain connection type when connecting your Zencam device to Amcrest Surveillance Pro.
Step 4: In Amcrest Surveillance Pro, give your device a name and then enter the IP address for the device in the IP Address field
Enter the username and password for your device and then press the "Add" button when you are finished. The device has now been successfully added to the Amcrest Surveillance Pro software. Ensure the Online Status is green indicating the device is properly connected.
Step 5: Navigate to the Live View option and locate the newly added device in the assigned Group menu. Double click the device to view the live feed.